dedicated-server interview questions
Top dedicated-server frequently asked interview questions
We recently migrated our Multi-domain magento setup from a shared host to a dedicated server.
All is working fine fronted, but when I try to go to the admin section I get a 404 error on anything after login.
It seems to work if I remove index.php from the url but then as soon as I click on another link in the admin section it 404's again with the index.php back in the URL.
Source: (StackOverflow)
I have one dedicated server with below configurations
i3 - Dual Core - 3.06Ghz H/T
16GB RAM
500GB SATA2
Now I want to execute two different Rails application on one dedicated server. A both application are different but they are using common database.
Is it possible to do that? If yes – How can I do that?
Is Phusion Passenger with Apache a good approach? If yes - How can I configure two application with one Phusion Passenger server?
Source: (StackOverflow)
What are the pros and cons of using dedicated servers versus Aamzon EC2 for hosting a high traffic website - that has about 2 million visitors and 5 million page views a month. The content is mostly dynamic and served from a database. Does anyone has any experience of the costs and performance for such a setup.
Source: (StackOverflow)
I have one website, not i want when i upload this site on live server it should ask for database username, password, site url..etc. Something like website installer. It is working fine in LOCAL system.
Now my problem is: i need to change RewriteBase in .htaccess file. But this file is located at root of site. So i am getting permission issue to create new file or edit/copy file which is located at root.
Warning: rename(generate.htaccess,.htaccess): Permission denied
Warning: copy(.htaccess): failed to open stream: Permission denied
What should i do. Please help.
Thanks.
Source: (StackOverflow)
I have created a dedicated server, but I need to change it into a default server in AWS. The bill has been racking up.
Source: (StackOverflow)
I know this question is asked alot and there are alot of answers on "how to resolve index.php issue in laravel".
However, I tried multiple ways in order to solve it from .htaccess on live dedicated server with WebsitePanel in order to remove index.php from URL. I tried a couple of ways however let me describe the issue here, index.php not only have changed the url, but also some of the css and javascript stuff are not loaded as well while most of them are loaded, CSS seems pretty fine but fonts are also changed.
It was working well at a shared host but here in a dedicated host it has alot of problems.
Is there a .htaccess code to solve this issue? and does index.php affects on CSS and is it normal?
my current htaccess is as follow:
<IfModule mod_rewrite.c>
<IfModule mod_negotiation.c>
Options -MultiViews
</IfModule>
RewriteEngine On
# Redirect Trailing Slashes...
RewriteRule ^(.*)/$ /$1 [L,R=301]
# Handle Front Controller...
Options +FollowSymLinks
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^ /index.php [L]
</IfModule>
Source: (StackOverflow)
I'm runing two blogs on a dedicated servers, one with 500 unique visitors per day and the other one with 18.000 unique visitors per day, in the cPanel I see the PHP is going up to 99% of CPU load and I have tried many things but nothing solves the load.
The server turns slow with 250 people online, with 500 start the db connection problems and of course the site turns too slowwwwwwwwwww.
I've also tried to deactivate all plugins but seems any of them is the problem.
These are the server specs:
CPU: AMD Athlon™ II X4 - 4x 2.3 GHz 4 Cores
Memory: 8GB Memory DDR3 ECC
Disk Controller: RAID 1 Software
First Hard Drive: 1000GB SATA Drive (7200 RPM)
Second Hard Drive: 1000GB SATA Drive (7200 RPM)
Uplink/Port Speed: 100 Mbps Uplink Port
Public Bandwidth: Unmetered 100Mbps
Operating System: Cent OS 6.2 64 bit
Control Panel Software: cPanel/WHM
[PHP] httpd.conf:
StartServers 5
MinimumSpareServers 5
MinimumSpareServers 10
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 10000
KeepAlive Off
Timeout 60
Wordpress Plugins:
Akismet
AZIndex
BackWPup
BulletProof Security
Category Templates Two
Contact Form 7
Easy FancyBox
leenk.me
qTranslate
Really Simple CAPTCHA
Search Everything
SI CAPTCHA Anti-Spam
Stealth Update
Verve Meta Boxes
W3 Total Cache
WordPress File Monitor Plus
WP-PostRatings
WP Total Hacks
Source: (StackOverflow)
I have a dedicated server at 1and1.com using Parallels Plex Panel which I set up with standard settings. I am trying to get the following file to run once a day:
httpdocs/www/routine.php (where httpdocs is the root of my website)
When I input this path in the Command field in their Scheduled Tasks panel, I get a "Permission denied" error. This is not a protected directory and the file runs perfectly from the web.
I have tried many other variations of the command based on things I have found online and info I have found when running phpinfo(). None of the following have worked (see below).
Has anyone here had similar issues at 1and1? What do I need to input into the command field to make this run? Is there a standard formula based on the phpinfo results? 1and1 is refusing to help.
From PHPINFO():
Note below that I have replaced my domain with "example.com" and my username by "unsername". The "default-domain.com" element is something unique to 1and1.com's hosting.
_SERVER["HTTP_HOST"]
www.example.com
PP_CUSTOM_PHP_INI:
/var/www/vhosts/example.com/etc/php.ini
DOCUMENT_ROOT
/var/www/vhosts/default-domain.com/httpdocs/www
SCRIPT_FILENAME
/var/www/vhosts/default-domain.com/httpdocs/www/routine.php
Previously tried:
/var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/var/www/vhosts/example.com/etc/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/var/www/vhosts/example.com/etc/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/var/www/vhosts/example.com/etc/php.ini /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/etc/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/usr/lib/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/bin/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/bin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/bin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/bin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/sbin/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/sbin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/usr/sbin/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/usr/sbin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/usr/bin/ /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/usr/bin/php /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
/sbin:/usr/sbin:/bin:/usr/bin /var/www/vhosts/default-domain.com/httpdocs/www/routine.php
php -q /username/example/httpdocs/www/routine.php
php -q /username/example.com/httpdocs/www/routine.php
php -q /example/httpdocs/www/routine.php
php -q /example.com/httpdocs/www/routine.php
php -q /username/httpdocs/www/routine.php
php -q /httpdocs/www/routine.php
php -q /www/routine.php
php -q /routine.php
php /username/example/httpdocs/www/routine.php
php /username/example.com/httpdocs/www/routine.php
php /username/www.example.com/httpdocs/www/routine.php
php /example/httpdocs/www/routine.php
php /example.com/httpdocs/www/routine.php
php /www.example.com/httpdocs/www/routine.php
php /username/httpdocs/www/routine.php
php /httpdocs/www/routine.php
php /www/routine.php
Source: (StackOverflow)
I have a file uploading site and am getting this error when trying to upload files larger than 400MB. Does anyone know where I can set this value? I also have ModSecurity Disabled for this account so I don't know why MS is catching this in the first place!
"Request body (Content-Length) is larger than the configured limit" - Anyone know where I can change the configuration limit?
Thank you
Source: (StackOverflow)
My postgresql server is extremely slow. Especially when I execute several queries at the same time in different threads, which somtimes causes the postgresql server to be unresponsive for 5 to 15 seconds. I wonder if I made a mistake in the postgresql.conf.
My dedicated server has 2 cores and 4 gb of ram, and a standard SATA-2 disk. There are 6gb of data in the postgres db (version 8.4) and a few hundred users simultaneously connected. I'm using JDBC to access postgress, running 1 to 10 simultaneous threads accessing the database. My server is a debian lenny. The Cpu is not used at 100%, neither is the memory.
Thanks for any sort of help.
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# (The "=" is optional.) Whitespace may be used. Comments are introduced with
# "#" anywhere on a line. The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload". Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on". Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units: kB = kilobytes Time units: ms = milliseconds
# MB = megabytes s = seconds
# GB = gigabytes min = minutes
# h = hours
# d = days
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.
data_directory = '/home/keyja/dbdata' # use data in another directory
# (change requires restart)
hba_file = '/etc/postgresql/8.4/main/pg_hba.conf' # host-based authentication file
# (change requires restart)
ident_file = '/etc/postgresql/8.4/main/pg_ident.conf' # ident configuration file
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '/var/run/postgresql/8.4-main.pid' # write an extra PID file
# (change requires restart)
#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------
# - Connection Settings -
listen_addresses = '*' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost', '*' = all
# (change requires restart)
port = 5432 # (change requires restart)
max_connections = 100 # (change requires restart)
# Note: Increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).
#superuser_reserved_connections = 3 # (change requires restart)
unix_socket_directory = '/var/run/postgresql' # (change requires restart)
#unix_socket_group = '' # (change requires restart)
#unix_socket_permissions = 0777 # begin with 0 to use octal notation
# (change requires restart)
#bonjour_name = '' # defaults to the computer name
# (change requires restart)
# - Security and Authentication -
#authentication_timeout = 1min # 1s-600s
ssl = true # (change requires restart)
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # allowed SSL ciphers
# (change requires restart)
#ssl_renegotiation_limit = 512MB # amount of data between renegotiations
#password_encryption = on
#db_user_namespace = off
# Kerberos and GSSAPI
#krb_server_keyfile = ''
#krb_srvname = 'postgres' # (Kerberos only)
#krb_caseins_users = off
# - TCP Keepalives -
# see "man 7 tcp" for details
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
# 0 selects the system default
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
# 0 selects the system default
#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------
# - Memory -
shared_buffers = 1024MB # min 128kB
# (change requires restart)
#temp_buffers = 8MB # min 800kB
#max_prepared_transactions = 0 # zero disables the feature
# (change requires restart)
# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
# It is not advisable to set max_prepared_transactions nonzero unless you
# actively intend to use prepared transactions.
work_mem = 100MB # min 64kB
maintenance_work_mem = 160MB # min 1MB
#max_stack_depth = 2MB # min 100kB
# - Kernel Resource Usage -
#max_files_per_process = 1000 # min 25
# (change requires restart)
#shared_preload_libraries = '' # (change requires restart)
# - Cost-Based Vacuum Delay -
#vacuum_cost_delay = 0ms # 0-100 milliseconds
#vacuum_cost_page_hit = 1 # 0-10000 credits
#vacuum_cost_page_miss = 10 # 0-10000 credits
#vacuum_cost_page_dirty = 20 # 0-10000 credits
#vacuum_cost_limit = 200 # 1-10000 credits
# - Background Writer -
#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
# - Asynchronous Behavior -
#effective_io_concurrency = 1 # 1-1000. 0 disables prefetching
#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------
# - Settings -
fsync = off # turns forced synchronization on or off
#synchronous_commit = on # immediate fsync at commit
#wal_sync_method = fsync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync (default on Linux)
# fsync
# fsync_writethrough
# open_sync
full_page_writes = off # recover from partial page writes
#wal_buffers = 64kB # min 32kB
# (change requires restart)
#wal_writer_delay = 200ms # 1-10000 milliseconds
#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000
# - Checkpoints -
checkpoint_segments = 20 # in logfile segments, min 1, 16MB each
#checkpoint_timeout = 5min # range 30s-1h
checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0
#checkpoint_warning = 30s # 0 disables
# - Archiving -
#archive_mode = off # allows archiving to be done
# (change requires restart)
#archive_command = '' # command to use to archive a logfile segment
#archive_timeout = 0 # force a logfile segment switch after this
# number of seconds; 0 disables
#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------
# - Planner Method Configuration -
#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on
# - Planner Cost Constants -
#seq_page_cost = 1.0 # measured on an arbitrary scale
#random_page_cost = 4.0 # same scale as above
#cpu_tuple_cost = 0.01 # same scale as above
#cpu_index_tuple_cost = 0.005 # same scale as above
#cpu_operator_cost = 0.0025 # same scale as above
effective_cache_size = 256MB
# - Genetic Query Optimizer -
#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on effort
#geqo_generations = 0 # selects default based on effort
#geqo_selection_bias = 2.0 # range 1.5-2.0
# - Other Planner Options -
#default_statistics_target = 100 # range 1-10000
#constraint_exclusion = partition # on, off, or partition
#cursor_tuple_fraction = 0.1 # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOIN clauses
#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------
# - Where to Log -
log_destination = 'stderr' # Valid values are combinations of
# stderr, csvlog, syslog and eventlog,
# depending on platform. csvlog
# requires logging_collector to be on.
# This is used when logging to stderr:
logging_collector = ON # Enable capturing of stderr and csvlog
# into log files. Required to be on for
# csvlogs.
# (change requires restart)
# These are only used if logging_collector is on:
log_directory = 'pg_log' # directory where log files are written,
# can be absolute or relative to PGDATA
log_filename = 'postgresql_%A.log' # log file name pattern,
# can include strftime() escapes
log_truncate_on_rotation = on # If on, an existing log file of the
# same name as the new log file will be
# truncated rather than appended to.
# But such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
log_rotation_age = 1d # Automatic rotation of logfiles will
# happen after that time. 0 disables.
#log_rotation_size = 10MB # Automatic rotation of logfiles will
# happen after that much log output.
# 0 disables.
# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
silent_mode = on # Run server silently.
# DO NOT USE without syslog or
# logging_collector
# (change requires restart)
# - When to Log -
#client_min_messages = notice # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# log
# notice
# warning
# error
#log_min_messages = warning # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic
#log_error_verbosity = default # terse, default, or verbose messages
#log_min_error_statement = error # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic (effectively off)
log_min_duration_statement = 1000 # -1 is disabled, 0 logs all statements
# and their durations, > 0 logs only
# statements running at least this number
# of milliseconds
# - What to Log -
#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
log_duration = off
#log_hostname = off
log_line_prefix = '%t [%p]: [%l-1] ' # special values:
# %u = user name
# %d = database name
# %r = remote host and port
# %h = remote host
# %p = process ID
# %t = timestamp without milliseconds
# %m = timestamp with milliseconds
# %i = command tag
# %c = session ID
# %l = session line number
# %s = session start timestamp
# %v = virtual transaction ID
# %x = transaction ID (0 if none)
# %q = stop here in non-session
# processes
# %% = '%'
# e.g. '<%u%%%d> '
#log_lock_waits = off # log lock waits >= deadlock_timeout
log_statement = 'all' # none, ddl, mod, all
#log_temp_files = -1 # log temporary files equal or larger
# than the specified size in kilobytes;
# -1 disables, 0 logs all temp files
#log_timezone = unknown # actually, defaults to TZ environment
# setting
#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------
# - Query/Index Statistics Collector -
#track_activities = on
track_counts = on
#track_functions = none # none, pl, all
#track_activity_query_size = 1024
#update_process_title = on
#stats_temp_directory = 'pg_stat_tmp'
# - Statistics Monitoring -
#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off
#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------
autovacuum = on # Enable autovacuum subprocess? 'on'
# requires track_counts to also be on.
log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
# their durations, > 0 logs only
# actions running at least this number
# of milliseconds.
autovacuum_max_workers = 3 # max number of autovacuum subprocesses
autovacuum_naptime = 1min # time between autovacuum runs
autovacuum_vacuum_threshold = 50 # min number of row updates before
# vacuum
autovacuum_analyze_threshold = 50 # min number of row updates before
# analyze
autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
# (change requires restart)
autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
# autovacuum, in milliseconds;
# -1 means use vacuum_cost_delay
autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
# autovacuum, -1 means use
# vacuum_cost_limit
#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------
# - Statement Behavior -
#search_path = '"$user",public' # schema names
#default_tablespace = '' # a tablespace name, '' uses the default
#temp_tablespaces = '' # a list of tablespace names, '' uses
# only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#session_replication_role = 'origin'
#statement_timeout = 0 # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#xmlbinary = 'base64'
#xmloption = 'content'
# - Locale and Formatting -
datestyle = 'iso, dmy'
#intervalstyle = 'postgres'
#timezone = unknown # actually, defaults to TZ environment
# setting
#timezone_abbreviations = 'Default' # Select the set of available time zone
# abbreviations. Currently, there are
# Default
# Australia
# India
# You can create your own file in
# share/timezonesets/.
#extra_float_digits = 0 # min -15, max 2
#client_encoding = sql_ascii # actually, defaults to database
# encoding
# These settings are initialized by initdb, but they can be changed.
lc_messages = 'en_GB' # locale for system error message
# strings
lc_monetary = 'en_GB' # locale for monetary formatting
lc_numeric = 'en_GB' # locale for number formatting
lc_time = 'en_GB' # locale for time formatting
# default configuration for text search
default_text_search_config = 'pg_catalog.english'
# - Other Defaults -
#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------
#deadlock_timeout = 1s
#max_locks_per_transaction = 64 # min 10
# (change requires restart)
# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.
#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------
# - Previous PostgreSQL Versions -
#add_missing_from = off
#array_nulls = on
#backslash_quote = safe_encoding # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#regex_flavor = advanced # advanced, extended, or basic
#sql_inheritance = on
#standard_conforming_strings = off
#synchronize_seqscans = on
# - Other Platforms and Clients -
#transform_null_equals = off
#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------
#custom_variable_classes = '' # list of custom variable class names
Source: (StackOverflow)
I wanted to install php on my dedicated Apache Server version 2.2 on Linux System.
So please suggest me some link where I found accurate documentation or steps for installation with all configuration and setting.
Source: (StackOverflow)
I need to provide a desktop application up to 10 users. This application is a ERP, basically database mining and reporting.
I will use Windows Server to offer support to concurrent users via Remote Desktop Connection.
Do somebody have experience comparing the performance between Azure Virtual Machine and a dedicated server?
At the present, I use Azure, but changing the settings to a powerful machine does not seem to affect to the time to generate reports, specially when the application needs to read the database or load the dlls for first .
Source: (StackOverflow)
Okay guys, I'm ready to bloody give up on this thing, I think I'm almost there though, just one last error, the server starts up fine, but then it fails saying that the bind on TCP/IP port already in use :S Which is not true, as mysql is not running :(
Errors:
bash-4.2$ mysqld
120730 18:31:05 [Note] Plugin 'FEDERATED' is disabled.
120730 18:31:05 InnoDB: The InnoDB memory heap is disabled
120730 18:31:05 InnoDB: Mutexes and rw_locks use GCC atomic builtins
120730 18:31:05 InnoDB: Compressed tables use zlib 1.2.5
120730 18:31:05 InnoDB: Using Linux native AIO
120730 18:31:05 InnoDB: Initializing buffer pool, size = 128.0M
120730 18:31:05 InnoDB: Completed initialization of buffer pool
120730 18:31:06 InnoDB: highest supported file format is Barracuda.
120730 18:31:06 InnoDB: Waiting for the background threads to start
120730 18:31:07 InnoDB: 1.1.8 started; log sequence number 2929794
120730 18:31:07 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306
120730 18:31:07 [Note] - '0.0.0.0' resolves to '0.0.0.0';
120730 18:31:07 [Note] Server socket created on IP: '0.0.0.0'.
120730 18:31:07 [ERROR] Can't start server: Bind on TCP/IP port: Address already in use
120730 18:31:07 [ERROR] Do you already have another mysqld server running on port: 3306 ?
120730 18:31:07 [ERROR] Aborting
120730 18:31:07 InnoDB: Starting shutdown...
120730 18:31:08 InnoDB: Shutdown completed; log sequence number 2929794
120730 18:31:08 [Note] mysqld: Shutdown complete
Source: (StackOverflow)
I'm trying to disable access logging (access_log) for domains. I can't find a way to do it yet, I thought if httpd.conf file exist of a domain maybe I can look into that. So do you know where is httpd.conf file of a domain?
Source: (StackOverflow)
We are building a first person shooter and we want to give out a dedicated server program. The only problem is that we have a leveling system and we don't want people to hack our dedicated servers and level themselves up. The way it is set up now is that the dedicated server connects to our main servers and report kills and such which we record to their profiles. So I guess my question is how do we check to make sure that the dedicated servers have not been altered when they connect to our main servers? Does that make sense?
Source: (StackOverflow)